Table of Contents
Advertisement
9
9.1
Specifying Machine Settings ("MACHINE
SETTING" Menu)
From the "MACHINE SETTING" menu, various functions of the machine's
operating environment can be set.
"MACHINE SETTING" menu:
No.
MACHINE SETTING
1
AUTO PANEL RESET
2
ENERGY SAVE
MODE
3
AUTO SHUT OFF
4
DENSITY (ADF)
5
PRINT DENSITY
6
LCD CONTRAST
7
BUZZER VOLUME
8
LANGUAGE
9
INITIAL MODE
9-2
Utility Mode – Copy Functions
Description
This function can be used to set the length of time until the
Control Panel automatically returns to its default settings
after copying or the last operation is finished.
• The manufacturer's default setting is 1 min.
This function can be used to set the length of time until the
machine automatically enters Energy Saver mode after the
last operation is finished.
• The manufacturer's default setting is 15 min.
This function can be used to set the length of time until the
machine automatically turns off after the last operation is
finished.
• The manufacturer's default setting is "OFF" (no auto
power-off).
This function can be used to set the image quality when
scanning using the Automatic Document Feeder (ADF).
Select "MODE1" when scanning normal documents (such as
documents created on a word processor), or select "MODE2"
when reproducing faint documents.
This function is only available when the Automatic Document
Feeder is installed.
• The manufacturer's default setting is "MODE1".
The print density can be set to one of five settings.
This function can be used to adjust the contrast of the Control
Panel display.
This function can be used to set the volume of alarms and the
beep sounded when a key is pressed.
• The manufacturer's default setting is "LOW".
This function can be used to set the language of the display
and the printed reports.
This function can be used to set the mode (Copy mode or
Fax mode) that the machine starts up in or returns to after the
Control Panel is reset.
• The manufacturer's default setting is "COPY".
Di152f/Di183f
Advertisement
Table of Contents
