When Copying Is Not Performed Correctly - Minolta Di 152f User Manual

13
13.2

When Copying Is Not Performed Correctly

Symptom
Nothing appears on the
display.
The [Start] key indicator is not
lit up in green.
Even though the [Start] key is
pressed, no copies are made.
The machine cannot be set to
Copy mode.
The machine cannot be turned
on.
13-4
Possible Cause
Only the [Start] key
indicator is lit up in green.
The "AUTO SHUT OFF"
function was activated.
A user (section) access
number has not been
entered.
If the "Error" indicator on the
Control Panel is lit, an error
has occurred.
If the machine was just
turned on, it is still warming
up.
The machine is in Interrupt
mode (the "Interrupt"
indicator is lit).
The power supply cord has
been unplugged from the
electrical outlet.
The breaker for the
electrical circuit has been
tripped.
Troubleshooting
Remedy
The machine is in Energy
Saver mode (preheat
mode).
Press any key to cancel
Energy Saver mode.
(p. 3-25)
Set the Power Switch to "O"
(p. 3-28).
Enter the user (section)
access number according
to the instructions in "To
enter an access number" on
page 3-27
Follow the instructions in
any messages that appear
on the display.
The machine takes about
30 seconds to warm up
after it is turned on.
Press the [Interrupt] key to
cancel Interrupt mode.
(p. 3-26)
Plug the power supply cord
into the electrical outlet.
Close the breaker for the
electrical circuit.
Di152f/Di183f