Basic Faxing; To Fax Using The Automatic Document Feeder - Minolta Di 152f User Manual

Faxing
6.2

Basic Faxing

To fax using the Automatic Document Feeder

1
Press the [Fax] key.
The machine enters Fax mode, and
the fax screen appears.
2
Load the document to be faxed into
the Automatic Document Feeder.
❍ Adjust the Document Guide
Plates to fit the size of the
document.
❍
Load the document face up.
3
If necessary, change the "Resolution" setting (p. 6-8).
4
Using the 10-Key Pad, enter the fax
number of the recipient.
❍ The fax number of a previously
programmed recipient can also
be specified. Refer to "Dialing"
on page 6-10.
5
Press the [Start] key to begin scanning and sending the fax.
❍ To stop the transmission, press the [Stop] key.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed
(p. 10-51).
Di152f/Di183f
6
6-3