Laser Safety; Internal Laser Radiation - Minolta Di 152f User Manual

Introduction
The Facsimile has been approved in accordance with Council Decision
1999/5/EC for pan-European single terminal connection to the public
switched telephone network (PSTN). However, due to differences be-
tween the individual PSTNs provided in different countries, the approval
does not, of itself, give an unconditional assurance of successful opera-
tion on every PSTN network terminal point.
In the event of problems, you should contact your equipment supplier in
the first instance.
NOTE
The manufacturer should ensure that the vender and user of equipment
is clearly informed of the above information by means of packaging and/
or user manuals or other forms of user instructions.
A full-length Declaration of Conformity is available at Minolta under
Fax.: +49-511-7404-346, Tel.: +49-511-7404-272 in informing us on the
serial number of your product.
This product is approved for DTMF dialing only. When directly
connected to the public switched telephone network (PSTN mode)
pulse dialing can not be used.
(Pulse dialing may only be used when this product is connected to a
PABX.)

Laser Safety

This is a digital machine which operates using a laser. There is no
possibility of danger from the laser provided the machine is operated
according to the instructions in this manual.
Since radiation emitted by the laser is completely confined within
protective housing, the laser beam cannot escape from the machine
during any phase of user operation.
This machine is certified as a Class 1 laser product: This means the
machine does not produce hazardous laser radiation.

Internal Laser Radiation

Maximum Average Radiation Power: 26.4 µW at the laser aperture of the
print head unit.
Wavelength: 770-795 nm
This product employs a Class 3b laser diode that emits an invisible laser
beam.
The laser diode and the scanning polygon mirror are incorporated in the
print head unit.
The print head unit is NOT A FIELD SERVICE ITEM:
Di152f/Di183f
1
1-9