Table of Contents
Advertisement
Basic Copy Operations
4.5
Specifying a Zoom Setting
By specifying a zoom ratio, the copy can be enlarged or reduced.
Zoom Settings
"Zoom" setting
Full size
"AUTO" zoom ratio
Preset zoom ratios
Zoom ratios selected
using the up and down
Zoom keys
"X/Y Zoom" function
To make copies using the "AUTO" zoom setting
1
Load the document to be copied.
❍
Refer to "Loading the Document" on page 4-1.
2
Press the [Auto Paper/Auto Size]
key until the "Auto Size" function is
selected.
❍
Check that "AUTO" appears in
the top line of the screen.
Di152f/Di183f
Description
Copies are made at the same size as the document ( 1.00).
The most appropriate zoom ratio is automatically selected based
on the size of the document loaded and the specified paper size.
The following common zoom ratios for copying from various
standard document sizes to standard paper sizes are available.
0.50
0.70 (A3
A4 and B4
0.81 (B4
A4 and B5
1.15 (B4
A3 and B5
1.41 (A4
A3 and B5
2.00
Using the
and
keys, the zoom ratio can be adjusted
(increased or reduced) in 0.01 increments.
A zoom ratio between
Copies can be made using different scaling proportions for the
vertical and horizontal directions.
Using the
and
keys, the zoom ratio can be adjusted
(increased or reduced) in 0.01 increments.
The vertical and horizontal zoom ratios can be set between
and
1.00.
B5)
A5)
A4)
B4)
0.50 and
2.00 can be set.
4
0.50
4-21
Advertisement
Table of Contents
