5
?
Do you know how large of an area is erased?
➜
The width of the erased area for the "Frame" setting can be set
between 5 mm and 20 mm, in 1 mm increments. The default
setting is 10 mm.
➜
The width of the erased area for the "Center" setting is fixed at
10 mm.
➜
The width of the erased area for the "Frame" setting can be
changed using the "ERASE SETTING" function in the Utility mode
(p. 9-36).
4
If necessary, specify any other copy settings.
5
Using the 10-Key Pad, enter the desired number of copies, and then
press the [Start] key.
5-4
Advanced Copy Operations
Di152f/Di183f