Table of Contents
Advertisement
Utility Mode – Copy Functions
?
Have the necessary precautions been observed when entering the
paper size?
➜
Refer to the diagram at the right
and be sure to specify the paper
width and length measurements
correctly.
6
Using the 10-Key Pad, enter the
paper width (mm), and then press
the [Yes] key.
❍
The paper width can be set
between 90 mm and 297 mm.
However, when the width is set between 280 mm and 297 mm, the
maximum length that can be set is 420 mm.
❍
If you wish to correct the setting, press the [No] key, and then enter
the new number.
The "PAPER SOURCE SETUP" menu appears again.
Di152f/Di183f
Width (y)
Length (x)
9
9-15
Advertisement
Table of Contents
