Turning On And Off And Initial Mode; Turning On And Off; When Copier Is Turned On; Initial Mode - Minolta CF9001 Operator's Manual

2-9

5. Turning ON and OFF and Initial Mode

Turning ON and OFF

When Copier is Turned ON

When the Power Switch is turned ON, the message "Warming-up. Pre-program a job." appears on the
Touch Panel and the copier now enables its auto copy start function.
Auto Copy Start Function
Pressing the Start Key at this point does not start a copy cycle. You're going to have to wait for approx. 9
minutes (at an ambient temperature of 20°C/68°F).

Initial Mode

When the Power Switch is turned ON, the Basic screen appears on the Touch Panel. The settings on this
screen are called the initial mode. The Basic screen serves as the reference for all panel settings to be later
made.
Useful Tip
The initial mode can be changed. For details, see Setting the Utility Mode.

Note on making multiple copies

If the fusing temperature drops excessively during a multi-copy cycle, there is a possibility that the
copying speed will be reduced. The copying speed will automatically return to normal when the fusing
temperature rises enough to ensure good fusing performance.
• Turning Copier ON
Press the Power Switch to the
• Turning Copier OFF
Press the Power Switch to the
1179O018AA
p.2-10
No. of copies selected
Zoom
Paper
Density
Input Output
Finishing
1179P168CA
:1
:× 1.000
:Auto Paper
:Manual Expo.
:1 1
:Non-Sort
p.5-1
(ON) position.
(OFF) position.