Selecting The Finishing Function - Minolta Di250 Operator's Manual

3-18
4. Selecting the Finishing

Selecting the Finishing Function

Sort/Group
Touch the desired finishing function key.
1
NOTES
• When either the Shift Tray, Finisher or
Mailbin Finisher is mounted, copies are fed
out in a sawtooth manner in Sort or Group
mode. When the Job Tray is mounted, or the
Shift Tray, Finisher or Mailbin Finisher are
not mounted, copies are fed out in a crisscross
manner in Sort or Group mode.
• Crisscross sorting is possible only when all of
the following conditions are met:
- The copier is loaded with paper of the same
size, but in two different directions.
- Mixed Original Detection is turned OFF
and Auto Paper is selected.
- None of the Page Insertion, and Cover
functions are set.
- When the original is placed on the glass and
the paper size is not selected.
Useful Tips
• Shift Sorting
The sorted copy sets are stacked in the same
direction, but in a sawtooth manner by
shifting the tray to the front or rear for each
set.
3(%
• Crisscross Sorting
The sorted copy sets are stacked in a
crisscross manner, one set stacked lengthwise
on top of another set stacked crosswise.
• Shift Grouping
The sorted copy stacks are stacked in the same
direction, but in a sawtooth manner by
shifting the tray to the front or rear for each
stack.
• Crisscross Grouping
The sorted copy stacks are stacked in a
crisscross manner, one stack stacked
lengthwise on top of another stack stacked
crosswise.
2$%
2$%
2$%
2$%