Apply Limit - Kyocera FS-1028MFP Operation Manual

OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals
Login User Name
*******************
Login Password:
[ Menu ] [ Login
User/Job Account:a b
1 User Login Set.
2
********************* Job Account.Set.
3 Unknown ID Job
[ Exit
Job Account.Set: a b
1 Job Accounting
*********************
2
Account Report
3 Total Accounting
[ Exit
Default Setting: a b
1

Apply Limit

2
********************* Copy/Print Count
3 Counter Limit
[ Exit
Copy/Print Count:a b
1
Total
2 *Split
*********************
3
If user login administration is disabled, the user
L b
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to log in with administrator
privileges. Refer to Adding a User on page 11-6 for
the default login user name and password.
]
NOTE:
• Refer to Character Entry Method on Appendix-5 for
details on entering characters.
• If [Netwk Authentic.] is selected as the user
authentication method, press [Menu] (the Left
Select key) to select the authentication destination.
4
In the User/Job Account menu, press the
key to select [Job Account. Set.].
]
5
Press the OK key. The Job Account. Set. menu
appears.
]
6
Press the
7
Press the OK key. The Default Setting menu
appears.
]
8
Press the
9
Press the OK key. Copy/Print Count appears.
10
Press the
Management
or key to select [Default Setting].
or key to select [Copy/Print Count].
or key to select [Total] or [Split].
or
11
11-21