Security Level; Interface Block Setting - Kyocera TASKalfa 356ci Operation Manual

Setup and Registration (System Menu) > System Menu
Network Interface (Send)
[System Menu] key > [System/Network] > [Network Interface (Send)]
NOTE
This function is displayed when the optional network interface kit or Wireless Network Interface Kit is installed.
Item
Network Interface (Send)

Security Level

[System Menu] key > [System/Network] > [Security Level]
Item
Security Level

Interface Block Setting

[System Menu] key > [System/Network] > [Interface Block Setting]
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
Item
USB Host
USB Device
USB Storage
Optional Interface 1
Optional Interface 2
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Specify the network interface card to be used for the send function, the network authentication
and connecting to external address book.
Value: Standard, Optional NIC
Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting normally.
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.
This locks and protects the USB port (USB host).
Value: Unblock, Block
This locks and protects the USB interface connector (USB Device).
Value: Unblock, Block
This locks and protects the USB memory slot.
Value: Unblock, Block
NOTE
This function is available when USB Host is set to [Unblock].
This locks and protects the optional interface slots.
Value: Unblock, Block
NOTE
You can set this feature for each slot.
8-49
Description
Description
Description