Installing Upnp In Windows Example; Figure 66 Configuring Upnp; Table 50 Configuring Upnp - ZyXEL Communications P-660W-Tx User Manual

Chapter 14 Universal Plug-and-Play (UPnP)

Figure 66 Configuring UPnP

The following table describes the fields in this screen.

Table 50 Configuring UPnP

LABEL
Enable the Universal Plug
and Play (UPnP) Service
Allow users to make
configuration changes
through UPnP
Allow UPnP to pass through
Firewall
Apply
Cancel

14.3 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
1 Click Start and Control Panel. Double-click Add/Remove Programs.
2 Click on the Windows Setup tab and select Communication in the Components
selection box. Click Details.
140
DESCRIPTION
Select this check box to activate UPnP. Be aware that anyone could use
a UPnP application to open the web configurator's login screen without
entering the ZyXEL Device's IP address (although you must still enter
the password to access the web configurator).
Select this check box to allow UPnP-enabled applications to
automatically configure the ZyXEL Device so that they can
communicate through the ZyXEL Device, for example by using NAT
traversal, UPnP applications automatically reserve a NAT forwarding
port in order to communicate with another UPnP enabled device; this
eliminates the need to manually configure port forwarding for the UPnP
enabled application.
Select this check box to allow traffic from UPnP-enabled applications to
bypass the firewall.
Clear this check box to have the firewall block all UPnP application
packets (for example, MSN packets).
Click Apply to save the setting to the ZyXEL Device.
Click Cancel to return to the previously saved settings.
P-660W-Tx v2 User's Guide