Paper Size; Paper Type Priority; Auto Size Detect; Customize Paper Settings - Xerox C75 System Administration Manual

Set the paper tray priority sequence for automatic tray selection. Automatic tray
selection means that a tray containing the appropriate paper is automatically selected
by the machine for copying or printing.
You can select paper trays 1-4 and optional 6 and 7. Tray 5 (Bypass) cannot be
selected.
4. Select the item to be set or changed, and select Change Settings.
5. Select a Priority setting (First-Sixth) and assign a specific tray to that priority setting.
Note
Only one tray can be set to each priority.
6. Select Save to save the selections and return to the Paper Tray Priority screen.
7. Select Close to return to the Paper Tray Settings screen.

Paper Size

Standard-sized paper that is loaded into trays 3, 4, and optional trays 6 and 7 is
automatically detected. However, when a nonstandard size is loaded, it is necessary to
specify the width and height.
Tip
Depending on the paper size, the guide lever may not fit, and this may cause paper jams
or other errors. Tray detection may also not be possible. In such cases, use tray 5 (Bypass
Tray).
Note
Trays 1 and 2 are preset at manufacturing at size 8.5 x 11 in. (A4); therefore, the paper
size for these two trays cannot be changed on this screen.

Paper Type Priority

1. Select Paper Type Priority.
2. Select a paper type from the list of items.
3. Select Change Settings.
4. Select the Priority Number from a list of Auto, First through Eighth.

Auto Size Detect

Standard-sized paper loaded in trays 3, 4, and optional 6 and 7 is automatically detected.

Customize Paper Settings

Select the features that are displayed about a paper in the Paper Supply screen (Copy
feature).
1. From the Paper Tray Settings select Customize Paper Supply screen.
2. Select an item.
3. Select Save to close this screen and return to the Paper Tray Settings screen.
Xerox Color C75 Press
®
System Administration Guide
Common Service Settings
9-53