Adjust Paper Curl Types 1-10 - Xerox C75 System Administration Manual

Common Service Settings
Note
The settings recommended in the RML were developed from testing a wide range of
paper samples, percentage of toner area coverage, and environments. The outcome of
this testing is the preset parameters shown in the list, and these parameters refer to
how particular papers interact with the digital press decurling system.
As previously stated, to correct paper curl, always uses Types A, B, and C before using a
customized paper curl setting. For example, if paper curl is a problem, do the following:
1. Select and use Type A; copy/print some samples and review the output.
2. If paper curl is still a problem, select and use Type B; copy/print some samples and
review the output.
3. If paper curl is still a problem, select and use Type C; copy/print some samples and
review the output.
4. If paper curl is still a problem, select and use one of the customized Types 1-10;
copy/print some samples and review the output.

Adjust Paper Curl Types 1-10

If the system default Types A, B, C did not successfully eliminate curl from the output,
use one of the customized Types 1-10. These customized types allow the user to create
and saved a paper curl profile based on paper type and weight, a specific paper tray,
and upward or downward curl adjustments to the output. This customized paper profile
is saved to the machine memory and can be recalled and used at point of need.
Paper Curl Types 1-10 include the following selections:
Name: Enter a name specific so that later recall is not an issue.
Paper type and weight: If accessing the Adjust Paper Curl feature from Common
Service Settings > Paper Tray Settings > Custom Paper Settings, selecting a specific
paper type and weight is available. This paper type and weight is assigned to the
selected paper curl type (for example Type 1) and associated with the name entered
and saved for that type.
Paper tray: If accessing the Adjust Paper Curl feature from Common Service Settings
> Paper Tray Settings > Paper Tray Attributes, selecting a specific paper tray is
available. This paper tray is assigned to the selected paper curl type (for example
Type 1) and associated with the name entered and saved for that type.
Paper curl selections also include the following:
1 Sided-Face Up: This option allows you to set specific paper curl information for
one-sided only printed output which exits the machine in the face up position.
1 Sided-Face Down: This option allows you to set specific paper curl information for
one-sided only printed output which exits the machine in the face down position.
2 Sided: This option allows you to set specific paper curl information for two-sided
printed output.
9-32 Xerox Color C75 Press
®
System Administration Guide