Adjust Paper Curl Options; Adjust Paper Curl Types A, B, C - Xerox C75 System Administration Manual

With some print jobs, the output prints still may be curled more than you desire even
after using the system default. In those cases, use the Adjust Paper Curl feature to
compensate for paper curl in the prints. Adjust Paper Curl settings are based on the job
type and image density ratio. These settings are manually entered through one of three
ways, and must be logged in as the administrator. Adjust Paper Curl can be accessed
from the Tools tab on the UI by selecting:
System Settings > Common Service Settings > Paper Tray Settings > Custom
Paper Settings
System Settings > Common Service Settings > Paper Tray Settings > Paper Tray
Attributes
System Settings > Common Service Settings > Maintenance
Note
It is important to remember that a successful paper curl correction setting used today
may not be the same setting that you would use on another day. This is especially
relevant if the room in which machine is located experiences changes in temperature
and humidity.

Adjust Paper Curl options

While paper curl is caused by many variables, it is important to understand that the
Adjust Paper Curl options, both the preset and custom options, use lookup tables for curl
control that are based on the job's percentage of toner area coverage and the humidity
values in the room where the machine sits. The Adjust Paper Curl feature includes the
following options:
Types A, B, and C
Types A, B, and C are system default settings. These preset options offer an alternative
to creating and using a customized setting. Always use these settings first before using
a customized setting. However, if the output is still curling more than desired, use one
of the customized Types 1-10 settings.
Types 1-10
Types 1-10 are customized by settings which are saved to the machine memory and
can be recalled and used at point of need.

Adjust Paper Curl Types A, B, C

If paper curl is a problem, using one of the preset Types A, B, or C settings usually
eliminates the problem. However, due to the broad range of paper variables, image
coverage, and environmental factors, these default settings may not result in satisfactory
performance. Always refer to the latest Recommended Materials List (RML) for your
machine for the recommended paper types and weights and the default paper curl
(decurler) settings to use with them. This RML can be downloaded from www.xerox.com.
Xerox Color C75 Press
®
System Administration Guide
Common Service Settings
9-31