Low Power Mode; Sleep Mode; Set/Change The Energy Saver Mode Time Intervals - Xerox C75 System Administration Manual

The machine automatically enters the Low Power mode after 15 minutes of inactivity;
this is the manufacturing default time. After 60 minutes of inactivity, the machine then
enters Sleep mode; this is the manufacturing default time. The time intervals for both
the Low Power and Sleep modes may be changed to reflect a value of 1-240 minutes
for each mode.
Here are two examples:
If Low Power Mode is set to 15 minutes and Sleep Mode is set to 60 minutes,
Sleep Mode activates after 60 minutes of total inactivity, not 60 minutes
after Low Power Mode begins.
If Low Power Mode is set to 15 minutes and Sleep mode is set to 20 minutes,
Sleep Mode activates 5 minutes after Low Power Mode begins.

Low Power mode

In this mode, the power to the UI and fuser unit is lowered to save power. The display
goes out, and the Energy Saver button on the UI control panel lights. To use the machine,
press the Energy Saver button. The Energy Saver button goes out to indicate that the
Energy Saver feature is canceled.

Sleep mode

In this mode, the power is lowered more than in the Low Power mode. The display goes
out, and the Energy Saver button on the UI control panel lights. To use the machine,
press the Energy Saver button. The Energy Saver button goes out to indicate that the
Energy Saver feature is canceled.

Set/change the energy saver mode time intervals

Note
The time intervals for both the Low Power and Sleep modes may be changed to reflect
a value of 1-240 minutes for each mode.
1. Login as administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
The UI displays the System Settings screen.
4. Select System Settings > Common Service Settings.
5. Select Energy Saver Settings.
6. Select Energy Saver Timers.
7. Select Change Settings.
8. Select the desired time interval for both the Low Power and Sleep modes.
Xerox Color C75 Press
®
System Administration Guide
Administrator overview
1-3