Xerox C75 System Administration Manual page 134

Common Service Settings
b) Cover the pattern with a black background paper for contrast.
Cover with black paper and align the white mark with the test print mark.
The order of scanning in not mandatory; the color coded side helps the user know
which side to scan.
15. Scan each of the four sides as per the UI instructions.
16. If using multiple samples, repeat the scanning process.
17. After scanning four times, an Exit button appears on the UI. Select Exit and the
scanning process completes.
18. Remove the test print and the black background paper from the document glass.
19. On the machine UI, select Confirm to send the data to the print engine's folder.
20. Go to the Windows PC where the SIQA application was installed.
21. From the Windows PC desktop, start the SIQA application by double-clicking it.
The Input_Key_Operator_ID screen is displayed.
Note
If the SIQA application fails to launch/open, go to the Problem Solving chapter in
the System Administration Guide for information and instructions on resolving the
problem.
22. Enter the key operator ID.
The ID password is admin.
23. Select OK (Start).
The Simple Image Quality Adjustment screen is displayed.
24. From the pull-down menu, select Auto Alignment Adjustment, and then select Start.
If the Input Address screen is displayed, confirm or enter the IP Address of the
machine.
Note
If the SIQA application is communicating to the machine that is connected to either
a FreeFlow Print Server or a Fiery EFI Integrated Print Server, enter the IP address
that appears on the Machine Status > Machine Information screen.
25. Select OK (Start).
The scanned image data from the printer folder/Mail Box is accessed and read by
the SIQA application. The SIQA application analyzes the data and automatically
calculates the adjustment values.
26. From the TypeSelect window, perform the following:
a) Select the line you want to save as a profile. There are 50 profiles available.
b) Select where to save the calculated adjustment values. In the example, Type 1
was selected, and then using the Edit button, it was renamed to Example > Tray
3 11 x17 .
27. Select OK.
9-26 Xerox Color C75 Press
®
System Administration Guide