Specifying Login Requirements; Network Authentication; Setting Up Network Authentication - Xerox C75 System Administration Manual

Specifying Login Requirements

You can specify password requirements, if desired.
1. In CentreWare IS, click Properties > Security > User Details Setup.
2. If you want the printer control panel to display text other than UserID, type the text
in the Alternative Name for User ID field.
3. Next to Mask User ID, select Hide if you want user ID characters to be displayed as
asterisks at the control panel.
4. Next to Failed Access Log, type the number of allowed login attempts (1-600). Type
0 to allow an unlimited number of login attempts. If the maximum number of allowed
attempts is exceeded, the printer is locked and must be restarted.
5. To allow users to log in without case sensitivity, select Non-Case Sensitive next to
User ID for Login.
6. To specify the Minimum Passcode Length, type the number of digits (4 to 12). Type
0 if you do not want to specify a minimum passcode length.
7. Click Apply to accept the changes or Undo to retain the previous settings.

Network Authentication

If you have an LDAP server connected to your network, you can configure the printer to
retrieve user information from the LDAP directory when authenticating a user at the
control panel.

Setting up Network Authentication

1. In CentreWare IS, click Properties > Security > Authentication Configuration.
2. On the Authentication Configuration page, next to Login Type, select Login to
Remote Accounts.
3. Select Enabled next to Print Stored File from Folder, and Enabled next to Folder
to PC/Server to enable these services.
4. Select Enabled next to Non-account Print to allow users without accounts to access
the printer.
5. To allow a guest user to access the printer, select On next to Guest User. Type the
Guest Password, then retype the password to verify.
6. Click Apply, then click Reboot Machine.
7. After the printer restarts, refresh your browser and navigate back to the
Authentication Configuration > Step 1of 2 page, and click Next at the bottom of
the page.
8. Next to Authentication System, click Configure.
9. On the Authentication System page select your Authentication System from the
drop-down list.
10. Type the Server Response Time-Out, and the Search Time-Out.
11. Select Enabled next to Assign UPN (User Principal Name) if desired.
Xerox Color C75 Press
®
System Administration Guide
Using the Scan Service
7-5