Materials - NTI ST-C5KVM-600 Installation And Operation Manual

NTI EXTENDEX Extenders

MATERIALS

Materials Included with this kit:
NTI XTENDEX Local Unit
NTI XTENDEX Remote Unit
2- 120VAC or 240VAC at 50 or 60Hz-9VDC/1.0A AC Adapters
CD with a pdf file of this owner's manual
Additional materials may need to be ordered, depending upon the configuration:
CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg.
8 for proper EIA/TIA 568 B wiring method)
Note: Shielded CAT 5,5e, or 6 cable must be used to connect to LOCAL and REMOTE units in order to meet CE emission
requirements.
Cable(s) needed if Local Unit will be located further than 15" from the CPU
Model
ST-C5KVM-600
ST-C5KVMRS-600
ST-C5KVMA-600
ST-C5V-600
ST-C5VRS-600
ST-C5VA-600
ST-C5SV-600
ST-C5SVA-600
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada
or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com and we will be happy to be of assistance.
Cable(s) needed
VKMEXT-xx
VKMEXT-xx and DINT-xx
VKMEXT-xx and SA-xx-MF
VEXT-xx
VEXT-xx and DINT-xx
VEXT-xx and SA-xx-MF
SVEXT-xx
SVEXT-xx and SA-xx-MF
2