Installing The Local Unit (Models With S-Video Connectors); Figure 4- Connect Stereo Speakers To Xtendex Local Unit With Audio Support; Figure 5- Connect The S-Video Local Unit To The S-Video/Audio Source - NTI ST-C5KVM-600 Installation And Operation Manual

NTI EXTENDEX Extenders
d) If the Local Unit has RS232 support, connect the local user's RS232 cable from a touch screen
monitor to the 9D male port on the Local Unit.
e) If the Local Unit has audio support, connect the cable from the local speakers to the 3.5mm
stereo audio jack on the Local Unit. (See Fig. 4)

Figure 4- Connect stereo speakers to XTENDEX Local Unit with audio support

Installing The Local Unit (models with S-Video connectors)

1. Plug the cables of the Local Unit into the back of the s-video source. (See Fig. 5.)
a) Connect the 4 pin miniDIN male cable end to the s-video port on the video source.
b) If the Local Unit has audio support, connect the red RCA plug to the "right" speaker jack on the
audio source and connect the white RCA plug to the "left" speaker jack on the audio source.
Note: Refer to the owner's manual of the s-video/audio source to determine how the left and right audio channels are
labeled.
DVD Player

Figure 5- Connect the S-Video Local Unit to the s-video/audio source

ST-C5KVMA-600 Local Unit
Front View
-
+
NTI
R
Network Technologies Inc
XTENDEX
3.5mm Stereo
Audio Jack
4 pin miniDIN Male
S-Video Connector
White RCA Plug
Left Channel
Red RCA Plug
Right Channel
8
Stereo
Speakers
NTI
R
Network Technologies Inc
XTENDEX
ST-C5SVA-600 Local Unit
(Front View)
-
+