Installation; Installing The Local Unit (Models With Vga Video Connectors); Figure 1- Connect The Local Unit With Vga Video And Rs232 Support To The Cpu - NTI ST-C5KVMA-600 Installation And Operation Manual

NTI XTENDEX 600 Foot Extenders

INSTALLATION

Installing The Local Unit (models with VGA video connectors)

1. Plug the cables of the Local Unit into the back of the CPU. (See Figure 1.)
a) Connect the blue 15HD cable end to the VGA port on the back of the CPU.
b) Connect the purple 6 pin miniDIN cable end with the keyboard symbol
on it to the keyboard port on the back of the CPU. (KVM models only)
c) Connect the green 6 pin miniDIN cable end with the mouse symbol
on it to the mouse port on the back of the CPU. (KVM models only)
DEVICE
CONNECTORS
6 pin miniDIN
Female
Connector
SERIAL
CONNECTOR
9D Male
RS232 Connector
VIDEO
CONNECTOR
15HD Female
Video Connector

Figure 1- Connect the Local Unit with VGA video and RS232 support to the CPU

d) If the Local Unit has RS232 support, connect the light gray 9D cable end to the RS232 port on
the back of the CPU.
e) If the Local Unit has Audio support, connect the black 3.5mm stereo plug into the "line out",
"spkr", or "headphones" jack on the back of the CPU. (See Figure 2)
Notes:
If all 3 jacks are available, use the jack marked "line out".
The "line out" jack is typically lime green and may be marked with this symbol
The "spkr" jack is typically orange, and may be marked with this symbol
The "headphones" jack may be marked with this symbol
(LIGHT GRAY- RS232)
(PURPLE-KEYBOARD)
(GREEN-MOUSE)
(BLUE- VIDEO)
PS/2 CPU
15HD Male
Video Connector
6 pin miniDIN
Male Connector
ST-C5KVMRS-600 Local Unit
(Front View)
8
(Keyboard)
(Mouse)
9D Female Connector
-
+
NTI
R
Network Technologies Inc
XTENDEX