Unpacking The Rmx; Unpacking The Rmx 2000; Unpacking The Rmx 4000 - Polycom RMX 2000 Getting Started Manual

Unpacking the RMX

Unpacking the RMX 2000

To unpack and lift the RMX 2000:
1
When you receive the RMX 2000 packing case, inspect the equipment
for damage and verify that the components match the packing slip.
2
Open the top cover of the RMX 2000 packing case and make sure that
the Installation Accessories kit contains the power cables and a USB
Key.
3
Remove the top cover, lift the RMX 2000 from the package and place
it on a flat surface.

Unpacking the RMX 4000

To unpack and lift the RMX 4000:
1 When you receive the RMX 4000 packing case, inspect the equipment
for damage and verify that the components match the packing slip.
2
The RMX 4000 is shipped in a packing case with Stratocell®
packaging, and the top cover must be unlocked and lifted.
3
Open the top cover of the packing case.
Two boxes are placed on the top Stratocell®, labelled:
— Installation Accessories. This kit contains the power cables and a
Disk-on Key (DOK).
— Rack Installation Accessories. This kit contains the accessories for
the 19" & 23" racks as follows:
Table 2-2 19" & 23" Rack Installation Accessories Package
Item ID
MEC2474A-L0
MEC2475A-L0
Make sure that boxes contain all the required parts.
Polycom RMX 2000/4000 Getting Started Guide
Description
Chassis runner for rack installation
on the RMX 4000. 19" & 23" racks
both require that these runners be
installed on the rack.
23" bracket to be fitted to the front of
the RMX 4000.
Quantity
2
2
2-5