Polycom RMX 2000 Getting Started Manual page 79

Polycom RMX 2000/4000 Getting Started Guide
Table 3-2 New Conference – General Options (Continued)
Field
Maximum Number
of Participants
Enable ISDN/
PSTN Dial-in
ISDN/PSTN
Network Service
Dial-in Number (1)
Dial-in Number (2)
3
If all participants are undefined, dial-in and no additional
information is required for the new conference, click OK.
4
To add participants from the Participants Address Book or to define
participants (mainly dial-out participants) click the Participants tab.
Description
Indicate the total number of participants that can be
connected to the conference. The automatic setting
indicates that the maximum number of participants
that can be connected to the MCU is determined
according to resource availability.
Note: If a number is specified, it should be large
enough to accommodate the participants specified in
the Reserve Resources for Video/Audio Participants
fields.
Select this check box if you want ISDN and PSTN
participants to be able to connect directly to the
conference.
The default Network Service is automatically
selected. A different ISDN/PSTN Network Service
can be selected from the Network Services list.
Leave this field blank to let the system automatically
assign a number from the dial-in range defined for
the selected ISDN/PSTN Network Service. To
manually define a dial-in number, enter a unique
number from the dial-in number range defined for
the selected Network Service. This number cannot
be assigned to another Conference/Reservation/
Meeting Room/Gateway Profile
By default, the second dial-in number is not defined.
To define a second-dial-in number, enter a required
number from the dial-in number range defined for
the selected Network Service.
3-19