Connecting Cables On The Rmx 2000 - Polycom RMX 2000 Getting Started Manual

• Using a shelf – Install the shelf, supplied by the rack manufacturer,
in the rack. Mount the RMX on the shelf. Fasten the RMX to the rack
with screws through the four holes in the RMX's front mounting
brackets.

Connecting Cables on the RMX 2000

Do not remove the protective caps from LAN1, LAN3 and ShMG ports.
Connect the following cables to the back panel:
• Power cable
• LAN cable to LAN 2 Port
• E1/T1 Cables to PRI Ports
E1/T1 PRI Connection
LAN 2 Connection
To maximize conferencing performance, especially in high bit rate call
environments, a 1Gb connection is recommended.
Polycom RMX 2000/4000 Getting Started Guide
Power
Cable
2-9