Hardware Specification; Unpacking And Installing The Rmx 1000 - Polycom RMX 1000 Getting Started Manual

Hardware Specification

Parameter
Form Factor
Height
Width
Depth
Gross Weight
Power Supply
AC Voltage

Unpacking and Installing the RMX 1000

1 Put the RMX 1000 product on a stable surface at the installation site.
2 Carefully take the RMX 1000 device out of the package. You can
install the device in the rack or position it on an even surface.
Mount the RMX 1000 in the rack: Install the brackets supplied
–
by the rack manufacturer on each side of the rack on which the
RMX 1000 is placed. Secure the system by fastening four
screws to the rack on the front panel.
2
Description
3U 19" rack mount
5.20" (132 mm)
16.93" (430 mm)
19.92" (506 mm)
48.4 lbs (22 kg)
Thermal controlled 650W ATX AC power supply
w/PFC
100 - 240 VAC, 50-60 Hz, 5-9 Amps