Polycom RMX 2000 Getting Started Manual page 39

Table 2-3 Fast Configuration Wizard – IP Signaling (Continued)
Field
Signaling Host
IP Address
MPM/MPM+ 1-4
IP Addresses
Subnet Mask
If Secured Communication is required on the RMX: complete the Fast
Configuration Wizard, Login, install the Certificate and then enable Secured
Communication Mode.
2
Click Next.
3
Enter the required Routers information in the dialog box.
Polycom RMX 2000/4000 Getting Started Guide
Description
Enter the address to be used by IP endpoints when
dialing in to the MCU.
Dial out calls from the RMX are initiated from this
address.
This address is used to register the RMX with a
Gatekeeper or a SIP Proxy server.
Enter the IP address(es) of the media card (s)
(MPM/MPM+ 1 and MPM/MPM+ 2-4 (if installed)) as
provided by the network administrator. Endpoints
connect to conferences and transmit call media
(video, voice and content) via these addresses.
Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
2-19