General; No Sync (No Signal); Sync Out Of Range (Unsupported Timing); Auto Configuration - Advantech PDC-190S User Manual

E.1

General

Sometimes you may see error messages from the LCD display. This means that the
LCD display cannot correctly receive the signal from the computer graphics card or
video equipment or is there is an under processing signal.
There are three kinds of messages which may appear. Check the connected cables
first or contact your local dealer for more information.
E.2

No Sync (No Signal)

This message means that the LCD monitor has been powered on but it cannot
receive a signal from the computer graphics card/video equipment you have con-
nected. Check to see if you have selected the correct input source (via the source
button) and then check the connection of power cables and video signal cables.
E.3

Sync out of Range (Unsupported Timing)

This message indicates the computer graphics card/video equipment is not compati-
ble with the LCD display. When the signal does not match one of those listed in the
compatibility mode we from Table B-1 of this manual, the LCD display will appear this
message:
E.4

Auto Configuration*

This message means the monitor is adjusting automatically according to the input
signal.
Note! This message only appear on D-sub (VGA) input signal.
PDC-190S User Manual 40