Location And Function Of Parts And Controls; Figure 2.1 Front Panel Of Pdc-190S; Table 2.1: Control Buttons Of Pdc-190S - Advantech PDC-190S User Manual

2.1

Location and Function of Parts and Controls

Before you start to set up the PDC-190S, take a moment to become familiar with the
locations and purposes of the controls, drives, connectors and ports, which are illus-
trated in the figures below. When you place the PDC-190S upright on the desktop, its
front panel appears as shown in Figure 2.1.

Table 2.1: Control Buttons of PDC-190S

No Control
Power Indicator
Power Button
Source
MENU Up
MENU Down
Decrement
*Volume down (Avail-
able when OSD not
active)
Increment
*Volume up (Available
when OSD not active)
PDC-190S User Manual

Figure 2.1 Front Panel of PDC-190S

Function
Power Status
When the power is turned on for the first time and
video signal is detected, the LED light is green.
When no signal is detected, the LED is blinking red.
When the power is turned off, the LED is dark.
Power control
Press to power on/off the LCD monitor.
Input select buttons
Press the button to monitor the signal input to each
connector.
Press to select items
Scroll up through the adjustment items.
Press to select items
Scroll down through the adjustment items.
Press to select the setting values
Decreases value of the adjustment items.
(*Decreases speaker volume when OSD not active)
Press to select the setting values
Increases value of the adjustment items.
(*Increase speaker volume when OSD not active)
8