Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Advantech PAX-327-C2 Series
Summary of Contents for Advantech PAX-327-C2 Series
- Page 1 User Manual PAX-327-C2 Series 27” FHD True-Flat Medical Monitor...
- Page 2 The documentation and the software included with this product are copyrighted 2021 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to improve the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.
- Page 3 Additional Information and Assistance Contact your distributor, sales representative, or an Advantech customer service cen- ter for technical support if you need additional assistance. Please have the following...
- Page 4 PAX-327-C2 User Manual...
-
Page 5: Table Of Contents
1.3.2 Input / Output Terminals ............... 4 1.3.3 General ..................7 1.3.4 Environmental Condition............... 8 AVAS - Advantech Video Archiving Solution (Optional)......8 Input/Output Signal Connectors ..............8 Chapter Installation..........11 Unpacking ....................12 System Controls..................12 Figure 2.1 PAX-327 Monitor Front View ........12 2.2.1... - Page 6 VCCI (Voluntary Control Council for Interference) ....35 Disposal of Waste ..........35 Safety and Maintenance ................. 36 4.6.1 Radio Frequency ................ 37 4.6.2 Keep Away From Windows............37 4.6.3 Storage Temperature..............37 4.6.4 Image Persistence ..............37 4.6.5 Placement and Adjustment of the Monitor........38 Appendix A Cleaning..........
- Page 7 Chapter Introduction...
-
Page 8: Chapter 1 Introduction
Variable gamma and DICOM (color temperature) modes Variable picture control Variable image size Variable multi-picture display mode IP-based monitor with Advantech AVAS built in (optional) Integrated touchscreen (optional) Built in wireless HDMI receiver (optional) PAX-327-C2 User Manual... -
Page 9: Specifications
Specifications Specifications of PAX-327-C2B-HAS, PAX-327-C2F-HAS, PAX-327-C2B-LAS, PAX- 327-C2B-LAR, PAX-327-C2C-LAS, PAX-327-C2K-LAS, PAX-327-C2F-LAS, PAX- 327-C2B-HAS-WL, PAX-327-C2B-HAR, Note! The specifications are subject to change without notice. 1.3.1 Display Model Name Item PAX-327-C2B-HAS PAX-327-C2B-HAS-WL PAX-327-C2F-HAS PAX-327-C2B-HAR Screen Size (Active Area) 27" (597.88(H) x 336.31(V) [mm]) Aspect Ratio 16:9 Number of Pixels... -
Page 10: Input / Output Terminals
Specifications Item PAX-327-C2K-LAS PAX-327-C2F-LAS Screen Size (Active Area) 27" (597.88(H) x 336.31(V) [mm]) Aspect ratio 16 : 9 Number of Pixels 1920 (H) x 1080 (V) Pixel Pitch 0.3114(H) x 0.3114(V) [mm] Displayable Colors 16.7 Million (8-bit) Brightness (Typical) 300 cd/m Contrast Ratio (Typical) 1,000:1 Display Mode... - Page 11 Audio: 0.5V[rms](Normal), Audio Output Ear Jack x 1 2 Channel (L+R) MAX: 1920 x 1080@60Hz Wireless Built in Wireless Range: 10M(in-room HDMI HDMI Receiver usage) Latency: 1ms DVI Jack x 1 Digital RGB: TMDS DVI Output (Type D) (Inter- MAX: 1920 x (For Display) nal Connection) 1080@60Hz...
- Page 12 Serial Input Common Mode: SDI (2nd) BNC Jack x 1 2.2V[p-p](75Ω) Output MAX: 1920 x 1080@60Hz DVI Jack x 1 DVI Output (Type D) (Inter- (For Display) nal Connection) RJ45 Jack x 1 SFP+ Module Specifications Item PAX-327-C2K-LAS PAX-327-C2F-LAS DC Power DC Jack x 1 DC24V, 4.16A(MAX) or 5A(MAX) Input...
-
Page 13: General
Warning! Do not touch signal input, signal output or other connectors, and the patient simultaneously. Caution! External equipment intended for connection to signal input, signal output or other connectors, shall comply with relevant IEC Stan- dard (e.g., IEC60950 for IT equipment and IEC60601-1 series for medical electrical equipment). -
Page 14: Environmental Condition
Storage 5 ~ 90% Operating 500 hPa to 1013 hPa Pressure Storage 500 hPa to 1013 hPa AVAS - Advantech Video Archiving Solution (Optional) 1 x RJ45 jack 1 x GbE SFP+ Module SFP+ 10 Gbps Built-in LEDs indicate the AVAS status, as explained below. - Page 15 PAX-327-C2K-LAS (2nd SDI option) PAX-327-C2C-LAS (RGB, 2nd SDI option) Symbol Signal Connector Specification 1 x Mini DIN jack RS-232C RS-232C Service port (8 pin) USB Up USB up 1 x USB-B jack Touch control (optional) Video input 1V[p-p] (75 Ω) [NTSC/PAL/ Video 2 x BNC jack SECAM]...
- Page 16 Warning! Do not touch the signal inputs, signal outputs, or other connectors while touching the patient. The specifications of Advantech products are subject to change without Note! notice. Type of protection against electric shock: Class l equipment. Degree of protection against electric shock: Not classified - no applied parts.
-
Page 17: Chapter 2 Installation
Chapter Installation... -
Page 18: Unpacking
Unpacking Before unpacking the LCD monitor, prepare a suitable, level, and clean workspace near a power outlet. The LCD monitor should be installed in a location with sufficient airflow and away from direct sunlight. After unpacking the LCD monitor, check to ensure that the following items have been included in the shipment: 1 x PAX-327 LCD monitor ... -
Page 19: I/O Ports
2.2.1 I/O Ports PAX-327-C2F-HAS, PAX-327-C2F-LAS (AVAS optional) (1) (2) (3) (4) (5) (6) (7) (8) (10) (11) (12) (13) (14) PAX-327-C2B-HAS, PAX-327-C2B-HAR, PAX-327-C2B-LAS, PAX-327-C2B-LAR (RGB option) PAX-327-C2B-HAS-WL (Built in Wireless HDMI Receiver Option) (1) (2) (3) (4) (6) (7) (10) (11) (12) (13) -
Page 20: Osd Key Functions
2.2.3 OSD Key Functions Key Name Function Power Key Power On/Off Menu/Enter Key Select main OSD menu. Select sub-menu. Apply adjustments (save). Wake up in DPMS mode Exit/Return to previous menu in main OSD menu. Exit / Input Can be used to activate the Input hot menu when the main OSD menu is not displayed. -
Page 21: Input /Output Signal Ports
2.2.4 Input /Output Signal Ports PAX-327-C2F-HAS, PAX-327-C2F-LAS (AVAS option) DC SWITCH DC POWER Input: +24V Power Connector DC POWER Output: +5V/+12V Power Connector RS-232C SDI 1 Input / Output S-VIDEO Input / Output VIDEO Input / Output DVI 2 Input / Output DVI 1 Input / Output DP/HDMI Input USB UP... -
Page 22: Interface On Avas Back Panel
PAX-327-C2C-LAS (RGB, 2nd SDI option) DC SWITCH DC POWER Input: +24V Power Connector DC POWER Output: +5V/+12V Power Connector RS-232C SDI 1 Input / Output S-VIDEO Input / Output VIDEO Input / Output DVI 2 Input / Output DVI 1 Input / Output DP/HDMI Input USB UP RGB Input... -
Page 23: Viewing Angle
Viewing Angle The PAX-327 LCD monitor can be vertically adjusted to the preferred viewing angle for maximum comfort. Caution! Do not force the monitor past its maximum extension in any direction as this may damage the monitor and the monitor stand. Positioning Before setting up your workstation, prepare a suitable installation space. - Page 24 PAX-327-C2B-HAS, PAX-327-C2B-HAR, PAX-327-C2B-LAS, PAX-327-C2B-LAR (RGB option) PAX-327-C2B-HAS-WL (Built in Wireless HDMI Receiver Option) PAX-327-C2K-LAS (2nd SDI option) PAX-327-C2C-LAS (RGB, 2nd SDI option) PAX-327-C2 User Manual...
-
Page 25: Chapter 3 Osd Menu
Chapter OSD Menu... -
Page 26: Osd Menu Controls
OSD Menu Controls PAX-327-C2 features onscreen display (OSD) controls that can be used to adjust the display contrast, brightness, clarity, color temperature, etc. Read the information in this chapter carefully to get the most out of your monitor. 3.1.1 Display Mode Menu Description Default... -
Page 27: Display Function
3.1.2 Display Function Menu Description Default Remarks Disp Rotate Used to rotate the screen. 0° Apply in 1P mode Disp Latency Not applicable. Used to adjust the ratio for the left LR Ratio and right displays. Apply in 2P LR mode Used to swap input sources for the Input Swap... -
Page 28: Select Region
3.1.3 Select Region Menu Description Default Remarks Left Side Select one region to control: Left side, Apply in 2P LR Right Side Left side Right side or Full. mode Full Top Side Select one region to control: Top Side, Apply in 2P TB Bottom Side Top Side Bottom Side or Full. -
Page 29: Picture
3.1.4 Picture Menu Description Default Remarks Backlight Used to adjust the backlight luminance. Used to adjust the screen brightness. Independent of Brightness Press the ˂ or > button to adjust. each input Used to adjust the screen contrast. Independent of Contrast Press the <... -
Page 30: Analog (Option)
3.1.5 Analog (Option) Menu Description Default Remarks Automatically adjust the Horizontal position, Vertical position, Horizontal size, Auto Adjust and Phase Window's background or characters should be displayed on your Full screen prior to proceed this function Used to adjust the horizontal position of H Position the screen. -
Page 31: Color
3.1.6 Color Menu Description Default Remarks Panel Uniformity Not applicable. Independent Gamma Used to select one of the various gammas. of each input Used to select one of the various color tem- peratures. Independent Temperature Clear * Set Gamma to OFF to adjust the red, green, of each input and blue values in the user mode. -
Page 32: Advance
3.1.7 Advance Menu Description Default Remarks RGB (Option) HDMI Full DVI 1 Used to select one of the various screen DVI 2 Aspect Ratio aspect ratios. SDI 1 AVAS (Option) Auto VIDEO Mode S-VIDEO RGB (Option) HDMI DVI 1 Used to activate/deactivate the over scan DVI 2 Over Scan function. -
Page 33: Advance
3.1.8 Advance Menu Description Default Remarks Used to configure the ultra vivid screen. Ultra Vivid [OFF, L, M, H] RGB (Option) HDMI DVI 1 Used to adjust screen over-scan ratio. DVI 2 Over Scan Ratio * After adjusting the over-scan ratio, set SDI 1 the Over Scan menu from Off to On. -
Page 34: Input
3.1.9 Input Menu Description Default Remarks RGB (Option), DP, HDMI, DVI 1, DVI 2, SDI 1, Used to select the monitor’s display input Auto Apply in 1P AVAS (Option), sources. Select mode S-VIDEO, VIDEO, Auto Select Left Side Used to select the input sources for the Apply in 2P left and right screens. -
Page 35: Audio (Option)
3.1.10 Audio (Option) Menu Description Default Remarks Used to adjust the speaker volume on Volume the monitor. Used to activate/deactivate the mute Mute function. [ON, OFF] Don't Switch Audio Source if Line In is Currently Playing unless a Digital Stand Alone Source is found. -
Page 36: Other
3.1.11 Other Menu Description Default Remarks Used to activate/deactivate the Reset monitor reset function. [YES, NO] Used to set the duration of the OSD Menu Time menu display. Used to adjust the horizontal posi- OSD H Position tion of the OSD menu. Used to adjust the vertical position OSD V Position of the OSD menu. -
Page 37: Information
3.1.12 Information Menu Description Default Remarks Used to access monitor infor- Information mation. 3.1.13 OSD Input Source RGB (optional) HDMI DVI 1 DVI 2 Used to select the Input source. SDI 1 * Auto Select cannot be selected in Multi-Display Mode. AVAS (optional) S-VIDEO VIDEO... - Page 38 PAX-327-C2 User Manual...
-
Page 39: Chapter 4 Safety Information
Chapter Safety Information... -
Page 40: Symbols
Symbols Symbol Title Caution symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions to avoid damage to equipment. Warning symbol is intended to alert the user to the presence of uninsu- lated “dangerous voltage” that may constitute a risk of electric shock to the person. -
Page 41: Ce Marking
CE Marking This marking is a declaration of conformity in accordance with Article 10(1) of the CE directive. This product has passed the CE test for environmental specifications. Test conditions for passing include the equipment being operated within an indus- trial enclosure. -
Page 42: Safety And Maintenance
Safety and Maintenance Caution! To ensure optimum performance, follow the safety instructions outlined below when setting up or using the equipment. Do not open the monitor. There are no user-serviceable parts inside. Opening or removing the cover may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. -
Page 43: Radio Frequency
Note! As with all personal display devices, Advantech recommends using a moving screen saver whenever the screen is idle and turning off the monitor when not in use. -
Page 44: Placement And Adjustment Of The Monitor
The configuration of the device should mainly be done by the user using the provided hardware keypad. Note! If software tools are provided by Advantech they should be operated using the specific instructions provided. Any software tools provided should only be installed on a computer with appropriate systems to pre- vent unauthorized access. -
Page 45: Appendix A Cleaning
Appendix Cleaning... -
Page 46: Cleaning The Lcd Panel
Cleaning the LCD Panel When the LCD panel becomes dusty or dirty, wipe it gently with a soft cloth. Do not rub the LCD panel with cloth of a hard or coarse material. Do not apply pressure to the LCD surface. ... -
Page 47: Appendix B Troubleshooting
Appendix Troubleshooting... -
Page 48: Non-Responsive Power Button
Note! As with all personal display devices, Advantech recommends using a moving screen saver whenever the screen is idle and turning off the monitor when not in use. - Page 49 PAX-327-C2 User Manual...
- Page 50 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2021...
Need help?
Do you have a question about the PAX-327-C2 Series and is the answer not in the manual?
Questions and answers