Installation Procedures; Connect Dvi Cable; Connect Vga Cable; Connect Composite Cable - Advantech PDC-190S User Manual

2.3

Installation Procedures

2.3.1

Connect DVI Cable

Connect the DVI-D cable to the DVI-I connector of the monitor. If the cable does not
seem to fit, it may be facing the wrong direction. Please turn the cable over and try it.
Caution! When the DVI-D signal is active, analog VGA input is not available.
2.3.2

Connect VGA Cable

Connect the DVI-I to VGA cable to the DVI-I connector of the monitor. If the cable
does not seem to fit it may be facing the wrong direction. Turn the cable over and try
to match the shape of the connector with that of the graphics adapter.
Caution! When the VGA signal is active, digital DVD input is not available.
2.3.3

Connect Composite Cable

Connect the BNC (75 ohms) cable to the Composite IN connector of the monitor. If
you have a loop-through requirement, please prepare another BNC cable for connec-
tion to the Composite OUT connector on the right side of the Composite IN connec-
tor.
The IN connector is terminated internally at 75 ohms when nothing has been con-
nected to the output connector. If a cable is connected to the output connector, the
internal terminal is automatically released and the signal input to the input connector
are output to the output connector (loop-through).
2.3.4

Connect Y/C Signal Cable

Connect the S-Video cable to the Y/C IN connector of the monitor. If you have a loop-
through requirement, please prepare another S-Video cable for connection to Y/C
OUT connector on the right side of Composite IN connector.
The IN connector is terminated internally at 75 ohms when nothing has been con-
nected to the output connector. If a cable is connected to the output connector, the
internal terminal is automatically released and the signal input to the input connector
are output to the output connector (loop-through).
2.3.5

Connect Component/RGB Signal Cable

Connect the 3 x BNC (75 ohms) cables to the YPrPb IN connector of the monitor.
Or connect the 4 x BNC (75 ohms) cables to the RGBS IN connector of the monitor.
11 PDC-190S User Manual