General Description; Specifications; Lcd Panel; Touch Screen - Advantech IDK-1107WR-50WVB1 User Manual

7" wvga industrial display kit with 4-wire resistive touch solution
Table of Contents

Advertisement

1.1

General Description

Advantech's IDK-1107WR-50WVB1 features a 7" industrial grade LCD display with
4-wire resistive touch.
1.2

Specifications

1.2.1

LCD Panel

Display Size: 7", 16:9
Resolution: 800 x 480
Display Mode: Normally Black (IPS base)
Viewing Angle (Horizontal/Vertical): 178°/178°
Brightness: 500 cd/m
Contrast Ratio: 800:1
Response Time: 25 ms
Colors: 262k (6bit) / 16.7M (8bit)
LCD Nominal Input Voltage / Current: 3.3V / 145mA(Vertical Stripe)
Backlight Input Voltage/ Current: 12V / 0.17A
Power Consumption: 2.48W (Typ.)
Signal Interface: LVDS
Weight: 182 g (.401 lb)
Dimensions (W x H x D): 170 x 110 x 6 mm (6.69 x 4.33 x 0.23 in)
Note!
(1) Module Outline Size without User hold. (Based on 2D Drawing)
(2) Module Thickness Size without PCBA/Connector. (Based on 2D
Drawing)
1.2.2

Touch Screen

Touch Screen: 4-wire Resistive
Light Transmission: 82.5 ± 2.5%
Interface: USB
Surface Hardness: 3H
Durability: 1 million times
1.2.3

Environment

Operating Temperature: -5 ~ 60 °C (23 ~ 140 °F)
Storage Temperature: -30 ~ 70 °C (-22 ~ 158 °F)
Note!
Temperature and relative humidity range is shown in the figure below.
IDK-1107WR-50WVB1 User Manual
2
90% RH Max. (Ta ≤ 40 °C/104 °F).
Wet-bulb temperature should be 39 °C (102 °F) Max. (Ta > 40 °C/
104 °F).
No condensation.
The absolute maximum rating values of this product are not
allowed to be exceeded at any times.
This module should not be used beyond the absolute maximum
rating value. Doing so will cause permanent, unrecoverable dam-
age
2

Advertisement

Table of Contents
loading

Table of Contents