A.8
Color Descriptions*
Selecting this control allows you to make adjustments to the Gamma and color tem-
perature level of the display screen.
Use the key on the front bezel to adjust the contrast any time the OSD is on.
Note!
This setting is only available on D-sub & video input, S-Video, compos-
ite, component/RGBS, SDI.
A.8.1
Auto Color*
Selecting this control allows you to adjust the color intensity, and color tones of input
signal automatically.
A.8.2
Color Temperature*
Selecting this control allows you to select the appropriate gamma/color temperature
mode based on your requirements. Four modes are listed as below:
Mode
6500K 2.2
6500K DICOM
4300K Endoscope
9300K 2.2
User 2.2
Figure A.2 Item Color in OSD display
Function
Color Temp: 6500K
Gamma: 2.2
Color Temp: 6500K
Gamma: DICOM Preset
Color Temp: 4300K
Gamma: Endoscope Gamma
Color Temp: 9300K
Gamma: 2.2
Color Temp: Customer config
Gamma: 2.2
19
PDC-190S User Manual