Preparing For First-Time Use - Advantech PDC-190S User Manual

PC Line IN/Audio Line IN
connector (2.5 mm phone
jack)
USB Hub Port (type A)
Equipotential terminal
DVI-I input connector
YPbPr/RGBS input connector
USB Port (type B)
2.2

Preparing for First-time Use

No tools are required to set up the LCD monitor. Simply follow the instructions out-
lined in the next few sections. Connectors for the signal cables and power are located
on the back of the panel behind the cover door.
Caution! To select the signal input for each connector manually, press the source
button on the monitor.
PDC-190S User Manual
Input connector for audio signals.
USB downstream port (to peripheral USB
devices).
Connects the equipotential plug (As below pic-
ture).
Inputs DVI Rev.1.0 applicable digital RGB sig-
nal.
Or inputs an analog RGB video signal (0.7 Vp-p,
positive polarity) and sync signal.
Input connector for component video signals /
RGB signals.
USB upstream port (to PC host devices).
10