1.3
Connectors
The following connectors are situated on the rear of the PDC-190S (From left to
right):
1.3.1
DC 12V Power In
The connector is connected to the DC 12V Switching Power Supply.
1.3.2
Analog and Digital Port (DVI-I)
The DVI-I connector integrates the analog RGB and digital DVI in one port, that can
be selected via "source" OSD button to switch which signal you want to input into the
monitor. Use of the scan converter allows the monitor to detect VGA, SVGA, XGA
and SXGA signal input. The details of compatible timings are listed in Appendix B of
this manual.
Table 1.1: Description of the DVI-I Port
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PDC-190S User Manual
Figure 1.1 PDC-190S connection port
Function Description
T.M.D.S. Data2-
T.M.D.S. Data2+
T.M.D.S. Data2/4 Shield
T.M.D.S. Data4-
T.M.D.S. Data4+
DDC Clock
DDC Data
Analog Vertical Sync
T.M.D.S. Data1-
T.M.D.S. Data1+
T.M.D.S. Data1/3 Shield
T.M.D.S. Data3-
T.M.D.S. Data3+
+5V Power
Ground (for +5 V)
Hot Plug detect
4