Using Serial Communications - Advantech PDC-190S User Manual

D.1

Using Serial Communications

The monitor can be operated according to control commands sent from external
equipment connected to it, e.g., a personal computer. For details on the pin assign-
ment and command protocol please refer to the section below:
Steps:
1. Prepare an RS-232C cable.
2. Connect the male end to the RS-232C terminal port on the PDC-190S.
3. Connect the female end to the RS-232C terminal port on the personal computer.
Input terminal Cable
RS-232C
PDC-190S User Manual
A straight cable with a D-sub 9-pin
connector (male for the monitor,
female for the personal computer
etc.)
Communication Specifications
Baud Rate: 115200 bps
(when Power On mode)
Data Bits: 8 bits
Parity: No parity
Stop Bits: 1 bit
Flow Control: No control
Communication Code: Hex Code
36