Pip (Enable/Disable); Pip Input (Sub Input Select); Pip Size; A.15 Pip Size - Advantech PDC-190S User Manual

A.13

PIP (Enable/Disable)

Select this control to adjust multi display settings. Selects ON to display the multi dis-
play and OFF not to display.
Note! This function works only when main display resolution is smaller than
1280 x 1024, 70 Hz.
When the frame frequency of the main display is different from that of
the sub display, the picture may be disturbed.
When no signal is input to the main display, the picture may not be dis-
played correctly.
A.14

PIP Input (Sub Input Select)

Select this control to set the input signal of the sub display. Select from among the
items listed below:
! DVI vs. Composite/S-Video/SDI.
! VGA vs. Composite/S-Video/SDI.
! Component vs. Composite/S-Video/SDI.
! RGBS vs. Composite/S-Video/SDI.
A.15

PIP Size

Sets the size of the sub display. Select from the modes listed below:
Mode
Small
Medium
Large
Side By Side
PDC-190S User Manual
Function
The sub display shrinks to a small size screen and overlaps the main
display.
The sub display shrinks to a medium size screen and overlaps the main
display.
The sub display shrinks to a larger size screen and overlaps the main
display.
The main display is placed on the left side of the display and the sub
display is placed on the right side of the display.
24