Introduction; A.1 Introduction - Advantech PDC-190S User Manual

A.1

Introduction

When you place the PDC-190S upright on the desktop (Landscape display), you will
see eight keys located on the bottom of front panel. Their function is described in the
table below:
Icon Control
Power Button
Source
SOURCE
MENU Up
MENU Down
Decrement
*Volume down (Available
when OSD is not active)
Increment
*Volume up (Available when
OSD is not active)
Menu/Escape
Multi-display On/Off
The OSD menu is activated by pressing the "MENU/ESC" key on the front bezel. You
can select and adjust the function of your choice by using other four keys ( ↑↓←→ )
together. The main menu displays a list of submenu icons and the current video input
mode.
Press the key ( ↑↓ ) to move the highlights to the control you would like to adjust,
then press the key ( → ) inward to select that control or to activate that function.
Depending on the control you selected, a submenu of the control with a status bar
will appear. The status bar indicates in which direction, from the factory preset, your
adjustments are being made.
When you have finished making the adjustments, the setting is saved automatically
by pressing the key MENU/ESC to exit the control function. If you do not touch any
key for 20 seconds, OSD is automatically exited saving your current settings.
PDC-190S User Manual
Function
Power control
Press the On/Off button to power the LCD moni-
tor.
Input select buttons
Press the button to monitor the signal input to
each connector.
Press to select items
Scroll up the list of adjustment items.
Press to select items
Scroll down the list of adjustment items.
Press to select the setting values
Decreases value adjusting down.
(*Decrease speaker volume when OSD is not
active)
Press to select the setting values
Increases value adjusting up.
(*Increase speaker volume when OSD is not
active)
Displays or sets the on-screen menu
Press to display the on-screen menu.
Press again to clean the menu and will save the
value of adjustment items.
Multiple display Enable/Display
Press to enable/disable multiple display.
14