Pin Assignment And Description; Connector And Led Location; Combo Interface Connector, Jp1, Pins And Signal Descriptions 23 Figure 6.1 Board Mounted Header - Advantech IDK-2110R XGA Series User Manual

Relative Humidity
95% at 60°C, RH Non-condensing

Acquired RoHS certificate
Requlatory FCC-B, CE approvals
Dimension: 75 mm x 20 mm x 10 mm
6.4

Pin Assignment and Description

6.4.1

Connector and LED Location

6.4.2 Combo Interface
Descriptions
The combo interface connector, USB and RS-232, is a box 2.0mm 10-pins 90
degree, Male type with lock connector, intended to be used with single wired pins in
5+5 pins header. The pins are numbered as shown in the table below.
USB Signal
Pin# Name
1 G
2 V
3 G
4 D+
5 D-
Signal DB-9 pin # RS-232 pin # Sourced by
Name
RxD 2
TxD 3
Connector,
Signal Function RS-232
Pin#
Ground 1
USB Power 2
Ground 3
USB D+ 4
USB D- 5
5 ctlr
4 host
Figure 6.1 Board mounted header
23
JP1, Pins and
Signal Signal Function
Name
G Ground
V Power
G Ground
TxD Serial Port
RxD Serial Port
Signal Description
serial data from controller to host
serial data from host to controller
IDK-2110R XGA User Manual
Signal