Adjustment & Operation - MK Diamond Products MK-377 Owner's Manual Operating Instruction & Parts List

MK-377 SAW
ADJUSTMENT & OPERATION
CAUTION
(A)
Loosen the retaining thumbscrew
and place the Adjustable Cutting
Guide to the desired cut length
and tighten thumbscrew
(D)
Perform the cut. Turn the motor
OFF when work is complete
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate for
which it was designed.
Place the tile against the
Ruler/Stop and Cutting Guide
(B)
Turn the motor ON and verify proper
cooling flow on both sides of the
blade (See Maintenance Section to
20
OPERATION
(C)
increase/decrease flow)