Table of Contents
Advertisement
Printing a file
The RIP allows you to print from virtually any Windows-based application.
Á
To print a file
1 Open the file from within the application.
2 Choose File/Print.
3 Select your CADJET 3D printer.
4 Click Features.
5 From here, Page Setup and Advanced tabs allow you to adjust printer specific
options for your print file. Generally, you should only need to set paper size
and orientation options.
6 Click OK, then click OK again to send your file to the printer.
Heidi Driver
Use the Heidi Driver to print files created with AutoCAD 2000, 2000i or LT 2000.
Details on the print options are included in the on-line help provided with the driver.
Á
To print from the Heidi Driver:
1 Open the document from AutoCAD 2000, 2000i or LT 2000.
2 Choose File/Print.
3 Select a printer.
4 Change basic print options, such as number of copies and page range, as
needed. When a print option is available in your application's Print dialog
box, set it with your application.
5 Open the printer properties dialog box and change the driver print settings as
needed. For more information, refer to the on-line help.
Device and Document Settings
Source: Select "Roll" or "Sheet" feed media source.
Width: The width setting is unused.
Size: Select media size. Most media sizes have four similar listings for combinations of
normal or expanded margins and long or short edge feed of the media. Expanded mar-
gins provide the maximum possible image area on the media. Expanded margins are
indicated by the word "expand" in the media size. Normal margins provide a larger border
area around the image. When media size is listed with the shorter dimension first, then
®
CADJET
3D User Guide
Printing 3-2
Advertisement
Table of Contents
