Table of Contents
Advertisement
®
CADJET
3D User Guide
Margins
Margins can be set to Normal or Expanded. The Expanded setting expands the print area
and decreases the margins.
Any part of the image that extends into the margin will be clipped. When the Margins
option is set to Expanded, make sure that you align the media accurately using the guide
on the right of the platen so that the ink doesn't exceed the edge of the media.
Cut sheet maximum printing area
Normal: 0.59" (15 mm) margin on each of three sides. 1.57" (40 mm) margin on the
fourth side for mono prints and 1.96" (50 mm) margin on the fourth side for color prints.
Expanded: 0.197" (5 mm) margin on each of three sides. 1.57" (40 mm) margin on the
fourth side for mono prints and 1.96" (50 mm) margin on the fourth side for color prints.
Rollfeed maximum printing area
Normal: 0.59" (15 mm) margin on all sides.
Expanded: 0.197" (5 mm) margin on all sides.
Printer Options 2-10
Advertisement
Table of Contents
