Peripheral Configuration - NEC N8100-1417F User Manual

4-10 Configuring Your Server

Peripheral Configuration

IMPORTANT:
overlapped with others. If the value set for the interrupt or base I/O
address is used in another resource, the yellow asterisk (*) appears.
Reset any item with the yellow asterisk properly.
Option
Serial Port A
Base I/O
address
Interrupt
Serial Port B
Base I/O
address
Interrupt
USB Controller
USB 2.0 Controller
Parallel ATA
Note that the interrupt and/or base I/O address are not
Parameter Description
Disabled Selects whether serial port A is enabled or
[Enabled] disabled.
[3F8] Selects the base I/O address for serial port
2F8 A.
3E8
2E8
IRQ 3 Selects the interrupt for a serial port A.
[IRQ 4]
Disabled Selects whether serial port B is enabled or
[Enabled] disabled.
3F8 Selects the base I/O address for serial port
[2F8] B.
3E8
2E8
[IRQ 3] Selects the interrupt for a serial port B.
IRQ 4
[Enabled] Selects the USB controller is enabled or
Disabled disabled.
Disabled Selects the USB 2.0 controller is enabled or
[Enabled] disabled.
Disabled Selects parallel ATA is enabled or disabled.
[Enabled]
Your Setting
[ ]: Factory-set