Driver Installation And Advanced Settings; Proset - NEC N8100-1417F User Manual

DRIVER INSTALLATION AND ADVANCED SETTINGS

This section describes on how to install and setup various standard drivers mounted on the device.
For the information on installing and setting up the driver that is not described in this section, please
refer to the document attached to the driver.

PROSet

NOTE:
execute by administrator privileges. Operation by [Remote Desktop
Connection] is prohibited.
Without changing any parameter when opened the properties of adapter
teaming, please click the [Cancel] button for close the dialog.
Click [OK] button will cause temporary loss of network connectivity.
PROSet is a utility that confirms the function of network contained in network driver.
Utilizing PROSet enables the following items:
Confirm detailed information of the adapter.
Diagnose loop back test, packet transmission test and so on.
Setup of teaming.
Configuring several network adapters as one team provides the server a tolerant environment on any
trouble and enhances throughput between the switches.
PROSet is necessary to utilize these features.
Follow the procedure below to install PROSet.
1.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive.
If the autorun menu is displayed, close menu screen.
2.
The [Windows Explorer] dialog starts.
* The procedure in the case of the standard start menu
Click Start menu and click [Windows Explorer].
* The procedure in the case of the classic start menu
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "dxsetup.exe" in the following directory.
\004\win\winnt\w2k3amd\dl3\proset\winx64
The [Intel(R) PROSet - InstallShield Wizard] dialog starts.
4.
Click [Next].
Installing Windows Server 2003 x64 Editions D-17
All of the operation that related to Intel® PROSet is must be