Internal USB Floppy Disk Drive
Your server can contain an internal USB floppy disk drive.
Installation (in 3.5-inch HDD Cage)
Follow steps below to install an internal USB floppy disk drive.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the side cover and open the front mask as described earlier in this chapter.
3.
Remove the two fixing screws and remove the dummy panel for floppy disk drive.
Fixing screw
Dummy panel
Fixing screw
IMPORTANT:
carefully.
Keep the removed dummy panel and fixing screws
Upgrading Your Server 9-59