Using Webbios - NEC N8100-1417F User Manual

4-36 Configuring Your Server

Using WebBIOS

Starting WebBIOS
1.
Press Esc when the screen as shown below appears after powered on the server.
2.
Press Ctrl + H on POST screen to start WebBIOS.
POST screen image (with no virtual disk assigned)
LSI MegaRAID SAS-MFI BIOS Version XXXX (Build MMM DD, YYYY)
Copyright (c) xxxx LSI Corporation
HA -X (Bus X Dev X) MegaRAID SAS PCI 8708EM2
FW package: X.X.X-XXXX
X Logical Drive(s) found on the host adapter.
X Logical Drive(s) handled by BIOS
Press <Ctrl> <H> for WebBIOS
IMPORTANT:
Do not press unnecessary key such as Pause during POST.
If you fail to press Ctrl + H and the system proceeds without
displaying the WebBIOS main menu (shown on the next page),
reboot the system, and press Ctrl + H on POST screen.