NEC N8100-1417F User Manual page 73

Main
Option
System Time
System Date
Hard Disk Pre-Delay
Primary IDE Master/
Primary IDE Slave
Secondary IDE Master/
Secondary IDE Slave
Processor Settings
Language
IMPORTANT:
operation if any of the following conditions is applicable.
– After carriage of device
– After storage of device
– After the device is entered into the pause state under the
environmental condition enduring device operation (temperature:
10°C - 35°C, humidity: 20% - 80%)
Check the system clock at the rough rate of once per month. When the
system clock is installed in a system requiring high time precision, it is
recommended to use a time server (NTP server).
If the system clock is remarkably delayed or advanced as the passage of
time in spite of adjustment, contact your service representative to ask
maintenance.
Parameter
HH:MM:SS
MM/DD/YYYY
[Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds
Select submenu
Select submenu
[English (US)]
Français (FR)
Deutsch (DE)
Español (SP)
Italiano (IT)
Check and adjust the system clock before the
Configuring Your Server 4-5
Description
Set the system time.
Set the system date.
When accessing the internal IDE
device for the first time during
POST, the system waits for the
specified time until the device
becomes ready.
Set the information on the device
connected to each channel on
the submenu. The settings of
some items may be changed.
However, leave the items as they
are at the shipment.
Shows the processor settings
submenu.
Select which language BIOS
displays.
Your Setting
[ ]: Factory-set