NEC N8100-1417F User Manual page 332

9-74 Upgrading Your Server
Installation
Install a CPU in the following procedure.
IMPORTANT:
Handle a CPU after making your body contact with a metallic frame
section of the server to discharge the static electricity on your body. Do
not make bare hands contact with the CPU pins. In addition, do not put
any CPU on a desk directly. See "Static Precautions" for details of the
static electricity.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the components as follows:
Side cover
CPU duct cover
3.
Locate the CPU socket which you are going to install CPU.
4.
Remove the CPU cover.
5.
Raise the locking lever on the socket.
IMPORTANT:
120 degrees or more.
Any CPU is easily affected by static electricity.
Open the lever until it stops. The bar can be opened to