Table of Contents
Advertisement
4-80 Configuring Your Server
CONFIGURING MOTHER BOARD JUMPERS
With the BIOS SETUP utility, you can set desired passwords to protect the data stored in the server
against access from unauthorized users. When you forget the passwords, however, you may want
clear them. The following describes how to clear these passwords. You can also use the following
procedure to clear the CMOS data in the server.
IMPORTANT:
Clearing the CMOS data resumes the factory-set configuration data.
Do not change any other switch settings. Any change may cause the
server to fail or malfunction.
Mother board
Jumper strap
Protect
Clear
Pin for protecting/
Pin for protecting/
clearing the CMOS
data (JBAT)
Protect
Clear
clearing the
password (J7)
Advertisement
Table of Contents
Troubleshooting
