NEC N8100-1417F User Manual page 109

Default settings and their explanation
Item
Battery Backup
Set Factory Defaults
Cluster Mode
Rebuild Rate
Patrol Read Rate
BGI Rate
CC Rate
Reconstruction Rate
Adapter BIOS
Coercion Mode
PDF Interval
Alarm Control
Cache Flush Interval
Spinup Drive Count
Spinup Delay
StopOnError
Stop CC On Error
Maintain PD Fail
History
Schedule CC
*1 Do not perform "Set Factory Defaults". If performed, the NEC's factory-set value will no longer
be restored.
How to change setting value
On [Adapter Properties] screen, change a parameter to desired value, and then click [Submit] at the
center of the screen to determine the new value.
When you determine the parameter value, click [Back] or [Home] to go back to the Main Menu.
Default Description
Present Displays Properties.
None When battery is installed: Present
•
When battery is not installed: None
•
[No] Restores vendor's factory defaults.
Yes
Disabled –
30 Recommended value: 30
30 Recommended value: 30
30 Recommended value: 30
30 Recommended value: 30
30 Recommended value: 30
[Enabled] –
Disabled
[None] –
128MB-way
1GB-way
300 –
[Disabled] Disabled: Does not issue an alarm.
Enabled
Silence
4 –
2 –
12 –
[Disabled] –
Enabled
[No] Specify the operation at error detection in
Consistency Check.
Yes
No: Recover and resume.
Yes: Abort
[Disabled] –
Enabled
Supported Set the scheduled consistency check.
Configuring Your Server 4-41
Change
–
Prohibited *1
Prohibited
Permitted
Permitted
Permitted
Permitted
Permitted
Prohibited
Prohibited
Prohibited
Prohibited *2
Prohibited
Prohibited
Prohibited
Prohibited
Permitted
Prohibited
Permitted