Table of Contents
Advertisement
2-24 General Description
Power Off
Follow the procedure below to power off the server. If the power cord of the server is connected to a
UPS, refer to the manual that comes with the UPS or the manual for the application that controls the
UPS.
IMPORTANT: Always allow POST to complete before turning off the
server.
1.
Shut down the OS.
2.
Press the POWER switch on the front of the server.
The POWER/SLEEP lamp goes out.
3.
Power off peripheral devices.
NOTE:
not select "Standby" in the Windows shutdown menu.
The standby function of Windows Server is not available. Do
Advertisement
Table of Contents
Troubleshooting
